LoRa Indoor Hub ILH 85

The Ursalink (EL-ILH-85-WGP-US) is an intelligent, performant, and configurable LoRaWAN gateway for smart IoT applications. The LH85 is based on the Semtech SX1301 chipset, allowing it to operate on multiple channels at the same time. It also offers an Ethernet interface for backhaul connectivity as well as WiFi networks.

  • Indoor IP30

  • Long Range of up to 8 Miles

  • Supports up to 2000 end devices

  • Echolo IoT Platform Integrated

  • Works out of the box with Echolo's MedKit service.

  • Wifi or Ethernet

Download the Echolo Specification Sheet (PDF) attached to this page.

LoRa Specifications

Connector

1 × 50 Ω SMA (Center PIN: SMA Female)

Channels

8

Frequency

915US (Configured to your Echolo deployment)

Sensitivity

-140dBm Sensitivity @292bps

Output Power

27dBm Max

Protocol

V1.0 Class A/Class C and V1.0.2 Class A/Class C


WiFi Specifications

Connectors

1 × 50 Ω SMA (Center PIN: SMA Male)

Standards

IEEE 802.11 b/g/n/ac

Tx Power

802.11b: 16 dBm +/-1.5 dBm (11 Mbps)

802.11g: 15 dBm +/-1.5 dBm (54 Mbps)

802.11n@2.4 GHz: 14 dBm +/-1.5 dBm (MCS7)

802.11n@5 GHz: 11 dBm +/-2 dBm (MCS7)

802.11ac@5 GHz: 10 dBm +/-2 dBm (MCS9)


Serial Interface

Ports

1 × RS232

Connector

Terminal Block

Band Rate

300 bps to 230400 bps


Power Supply and Consumption

Power Input

2-pin with 5.08 mm terminal block

Input Voltage

9-48 VDC

Power Consumption

Typical 2.3 W, Max 6.5 W


Environmental Specifications

Operating Temperature

-40°C to +70°C (-40℉ to +158℉) Reduced Cellular Performance Above 60°C

Storage Temperature

-40°C to +85°C (-40℉ to +185℉)

Ethernet Isolation

1.5 kV RMS

Relative Humidity

0% to 95% (non-condensing) at 25°C/77℉