Skip to main content

Echolo O1 (OLR) WiFi Setup

Things you’ll need before you start.

  1. Hub Key - You may access the Hub key in the Echolo IoT Dashboard.

  2. Hub ID - Found on the back or inside of the Hub.


You may be prompted by your browser letting you know "Your connection is not private". This is because the Hub does not have an SSL Cert that your browser will recognize. Simply proceed to the login screen.

Have your Hub ID and Hub Key near by.

  1. First, unbox and plug the OLR into a power source using the UBS and AC adapter included with the unit.

  2. Using your phone or computer, connect to the Hub's WiFi (blegw_XXXXXXXXXXX), the password will be the Hub key.

    username: root
    password: {Hub Key}
  3. Once connected via WiFi to the Hub, you will need to point your browser to: ''

  4. Now that you are logged in, you can click on "Network". Once there you should change "Wan Mode" from "Ethernet" to "WLan". From here you can select a visible WiFi network and enter your WiFi password.

  5. Click "Apply", the Hub will let you know it needs to reboot, click "OK" and then disconnect from the "blegw_XXXXXXXXXX" WiFi.


You are now, finished and should see a flashing GREEN LED on the Hub. If you see a RED flashing LED then follow the steps above again. If you continue to have issues, please contact support for more help.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.