Quick start for the Echolo O1/02 (OLR)
Our hubs are easy to set up and, in most cases, are plug-and-play!
RED LED Flashing - This means the Hub is not connected to the IoT Network and Internet.
GREEN LED Flashing - Connected to the IoT Network and Internet.
First, unbox the O1 and locate the USB cable and power supply OR if using Power over Ethernet (PoE), locate the PoE cable.
Plug the USB cable into the O1 OR if using PoE plug the Ethernet into the PoE Port.
Once the unit has power, you can now connect the Hub to the internet by using the Ethernet port OR Wifi Setup.
After you connect the Hub to the internet, you will see an LED on the right-hand side of the Hub. It will flash RED until the Hub is connected to the internet. Once the Hub is connected to the internet, the LED will flash GREEN every second.